← See the full germination data sheet

How to germinate Solanum lycopersicum s' — step-by-step guide

Tomate
By Caio Molon Nogueira, especialista em espécies exóticas

This tomato (Solanum lycopersicum) is an easy variety with a germination rate of around 85%. A 24-hour soak and a very short cold stratification of 2 days help it germinate quickly and evenly. After that, warm soil does the rest: germination usually takes only 5–10 days.

Before you start: don't use all your seeds at once

Split your seeds into two or three small batches and use only one batch on your first attempt. Keep the rest dry in a paper envelope inside a closed jar in a cool, dark place (never the freezer); tomato seeds keep well for several years this way. If something goes wrong (the mix stays too wet, the room is too cold, a pest finds the tray), you will still have seeds for a second attempt and can correct what failed.

Label each batch with the date and what you did to it (for example "sown on the surface, warm windowsill"). These notes are the most useful thing you can bring to a second attempt.

Quick summary

Step What to do Time
1 Soak in clean water 24 hours
2 Cold stratification in the fridge 2 days
3 Sow lightly covered and press in 1 day
4 Keep warm and moist 5–10 days
5 Pot on, harden off, plant out 6–8 weeks

What you'll need

  • Tomato seeds (one batch)
  • A cup of distilled or clean water
  • Damp paper towel and a small sealable bag
  • Well-drained seed-starting mix (or moist sand)
  • Seed trays or small pots with drainage holes
  • Heated mat (helpful)
  • Labels and a pen

Step 1 — Soak the seeds

Soak the seeds in distilled (or clean) water for 24 hours. The parameters also mention salt-priming solutions, which are specialist methods; plain water works well at home.

Why? Hydration primes the seed so it germinates faster and more evenly.

Step 2 — Cold stratification (2 days at 4°C)

Place the soaked seeds in a damp paper towel inside a sealed bag and keep them in the fridge at about 4°C for 2 days. Never use the freezer.

Step 3 — Sow

Fill trays or small pots with a well-drained seed-starting mix (or moist sand). Place the seeds on the moist surface, press them in and cover them lightly. Pressing the seeds into the moist mix stimulates germination.

Step 4 — Germination conditions

Keep the mix at around 25°C (range 18°C to 30°C); a heated mat at 70–85°F (21–29°C) speeds things up. Avoid temperatures above 36°C, which block germination. Keep the mix at medium moisture. Water from below: stand the pot in a shallow dish of water for a few minutes, then let it drain.

Step 5 — Pot on and plant out

Give seedlings bright light as soon as they appear. Always hold seedlings by a leaf, never by the stem. Pot them on when they have true leaves, harden them off over one to two weeks and plant them out in full sun once frosts are over.

If your seeds don't germinate

Germination is usually fast. If nothing appears after 10 days, check the temperature first (cold slows it a lot, and above 36°C blocks it) and that the mix has stayed moist. Your reserve batch can go through the soak and 2-day cold step again.

Common mistakes

  • Germinating in a cold place.
  • Overheating the tray above 36°C.
  • Letting the mix dry out.
  • Covering too deeply instead of lightly.
  • Too little light after emergence.

Need help?

If you have followed these steps and something still isn't working, contact Quinta dos Ouriques. Tell us what you did and when (your batch labels help a lot), and ideally send a photo of the seeds or the tray. A clear photo usually lets us see straight away whether the problem is moisture, light, temperature or mould, so we can suggest exactly what to change for your next batch.

Quinta dos Ouriques · university.quintadosouriques.com/how-to-germinate/solanum-lycopersicum-s-step-by-step